Skip to content
DSO 25 /50 /70 /100 MHz
Description
Double Analog Channels High-resolution colorful LCD display with resolution of 400 X 240 (or 800 X 480)
To support plug and play USB storage instrument to communicate with computer.
Automatic waveform and status setup. Waveform, setup, bitmap storage, waveform and setup reoccurrence.
Elaborate view window extension function for delicate analysis of waveform details and profile
Automatic measurement of 28 kinds of waveform parameters
Automatic cursor tracing and measurement function
Unique waveform recording and playback functions
Embedded FFT
Multiple mathematical calculation functions (including +, -, X, ÷ ) for waveform
Edge, video, pulse width and ALT Trigger functions
Multi-language menu display
Bandwidth 25MHz
Sampling Rage: 250MSA/Sec.
Storage Depth: 25k
Record Length: Sampling Point of 2 x 521k
Vertical Deflection: 1mV/div~5V/div
MULTI METER
Description
T-RMS
Data Hold to freeze displayed data
Auto power Off
Auto-ranging
Relative Measurement facility
Non Contact Voltage Detector
Display: 3-5/6 Digits 6000 counts LCD
DC Voltage: 0 – 600mV / 6 / 60 / 600 / 1000V
Accuracy: ±0.5%
AC Voltage T-RMS: 0 – 600mV / 6 / 60 / 600 / 1000V
Accuracy: ±0.8%
DC Current: 0 – 600u / 6000u / 60m / 600m / 6 / 20A
Accuracy: ±1.0%
AC Current T-RMS: 0 – 600u / 6000u / 60m / 600m / 6 / 20A
Accuracy: ±1.2%
Resistance: 0 – 600 / 6k / 60k / 600k / 6M / 60M.Ohms
Accuracy: ±0.8%
Capacitance: 0 – 6n / 60n / 600n / 6u / 60u / 600u / 6m / 60m F
Accuracy: ±4.0%
Frequency: 0 – 9.999Hz ~ 9.999MHz
Accuracy: ±0.1%
Duty Cycle: 0.1% to 99.9%
Temperature: -40 to 1000 ˚C
Accuracy: ±1.0%y
Duty Cycle, Transistor, Diode and Continuity Test
Confirms to CE, CAT-II 1000V.
LCR METER
Description
Dual Backlit LCD display
Auto LCR smart check and measurement
Series/Parallel modes are selectable
Ls/Lp/Cs/Cp with D/Q/ θ/ESR parameters
Support DCR mode 200.00Ω~200.0MΩ
Five different test frequency are available: 100/120/1k/10k/100k Hz
Test AC signal level: 0.6mVRMS typ.
Test range: (ex. F=1kHz)
L: 200.00 μH ~ 2000.0 H
C: 2000.0 pF ~ 2.000 Mf
R: 20.000 Ω ~ 200.0 MΩ
Multi-level battery voltage detector
Support Backlight & Buzzer sound driver
Parameters displayed: DC Resistance, Serial Inductance, Parallel Inductance, Serial Capacitance, Parallel Capacitance, Serial Resistance, Parallel Resistance, Phase Angle, Equivalence Serial Resistance, Dissipation Factor, Quality Factor
POWER SUPPLY
Description
Utilizes SMT Technology
Green LED Display
Voltage and Current displayed together
Multi-turn variable device to provide high precision voltage setting.
Auto-tracking on PARALLEL and SERIAL working condition
Presetting the voltage and current
DC Output Switch
Extended output terminals
Continuous working under full load condition
Constant Current and Constant Voltage Protection
Short Circuit protection
Input : 220 / 110V ±10% 50~60Hz
Variable Output Voltage : 0 – 30V DC
Variable Output Current : 0 – 2A
INSULATION TESTER
Description
Hand Held Easy to use instrument
Extra Large Backlit LCD Display 3-1/2 Digits
Data Hold Function
Battery cum Mains Operated
Over-range and Low Battery Indication
Test Voltage: 250V / 500V / 1000V
Measuring Range: 200M.Ohms @ 250V / 200M.Ohms @ 500V / 2000M.Ohms @ 1000V
Accuracy: ±4%
Measures DC Voltage: 0 – 1000V
Accuracy: ±0.5%
Measures AC Voltage: 0 – 750V
Accuracy: ±1%
Low Resistance: 0 – 2kOhms
Accuracy: ±0.8%
Continuity Test
LUX METER
Description
4 Digits Backlit LCD Display
Data Hold
MAX/MIN Record Function
Lux and FC (Foot-Candle) Scales
Range: 0 to 200,000 Lux
Resolution: 1 Lux up to 9999, thereafter 10 Lux
Accuracy: ±5%
Fast Sampling Rate
Low Battery Indication
Auto Power Off
Over-range Indication
1.5 x 3 AAA Battery Operated
Confirms to EN61326-1, Pollution Level 2
CLAMP METER
Description
3-3/4 Digits 3999 Counts Backlit LCD Display
Built-in Flash light to access dark Areas
Non Contact Voltage Detector to show the presence of Voltage
Sleek Ergonomic Design
Confirms to IEC/EN 61010-1, IEC/EN 61010-2-032 & IEC/EN 61010-2-033
Confirms to UL, CAT-III 600V
Data Hold to Freeze Displayed Data
MAX-MIN record function
Relative measuring facility
30mm Jaw Dia
Overload indication
600V AC/DC Protection in all ranges
Auto Power Off
AC T-RMS Current: 0 – 40 / 600A
Accuracy: ±2.5%
DC Current: 0 – 40 / 600A
Accuracy: ±2%
AC T-RMS Voltage: 0 – 4 / 40 / 400 / 600V
Accuracy: ±1.2%
DC Voltage: 0 – 400m / 4 / 40 / 400 / 600V
Accuracy: ±0.8%
Resistance: 0 – 400 / 4k / 40k / 400k / 4M / 40M.Ohms
Accuracy: ±1%
Capacitance: 0 – 40n / 400n / 4u / 40u / 400u / 4m / 40mF
Accuracy: ±4%
Frequency: 10Hz ~ 1MHz
Accuracy: ±0.1%
Temperature: -40 to 1000°C
Accuracy: ±1%
Continuity & Diode Test
